NARROW FORGED JOHNNY JOINT 2 INCH 1.600 INCH X...

    NARROW FORGED JOHNNY JOINT 2 INCH 1.600 INCH X 0.562 INCH BALL 3/4 INCH-16 RIGHT HAND THREADED SHANK EXTERNALLY GREASED EACH ROC

    CE-9112N75-13
    99.00 €
    Tax included SHIPPING 3 TO 15 DAYS

     

    RockJock's narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint!

    Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushing that encases the inner ball.

    The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring.

    This specific joint is a 2 Inch diameter, fitted with a zerk fitting for greasing, 2 1/4 Inch of 3/4 Inch-16 right hand threads on the shank, and a 1.600 Inch mounting width ball with a .562 Inch thru bolt hole. Finished in gold zinc plating.

    Details:

    • Narrow Forged Johnny Joint
    • 2 Inch
    • 1.600 Inch X 0.562 Inch Ball
    • 3/4 Inch-16 Right Hand Threaded Shank
    • Externally Greased
    • Each
    CATEGORY
    JOINTS
    ROCKJOCK 4X4
    HEIM JOINTS
    1385947281785
    CE-9112N75-13

    16 other products in the same category: